We are a Czech family-owned company dealing with the development, manufacture and sale of Branch Loggers URBAN. The Machines create a large chip from branches - blocks of chip with a length of about 10 cm. The big chips can be used as a cheap fuel for heating which can be easily burnt in conventional boilers for solid fuel or in wood-gasification boilers, unlike small fine chips. Thanks to chipping you convert a waste wood and branches in a full quality fuel.
The production programme consists of two basic lines of machines. The Branch Loggers mounted on a three-point hitch of a tractor and the Branch Loggers with self-drive (electric motor or gasoline engine Briggs & Stratton). The machines are able to process the branches with a diameter up to 120 mm (depends on type). The chips can be filled into raschle bag, Big-Bag, or carried by a belt conveyor.
The chipping device works on the principle of two shafts with chipping knives rotating against each other. There are three knives on each shaft. These knifes are made from high-quality steel and you can sharp them repeatedly. Knives can produce 100 – 400 m3 chips on one sharpening. It depends on quantity of impurities (clay, stones, etc.).
The branches are automatically fed into the chipping device by chipping knives.