gardening. landscaping. greendesign.

12 - 15 September 2018 // Nuremberg, Germany

Posting print layout

What information should be shown in the print layout?

Create print layout
Zoom product LOGO_Trilo verticutting units

Trilo verticutting units

LOGO_Trilo verticutting units

Trilo verticutting units

Request information Request information

Contact us

Please enter your personal information and desired appointment. You can also leave us a message.

Your personal information

Your message for us

Desired appointment during the exhibition

* Compulsory fields you must fill in.
Send
Your message has been sent.

Would you like to use more facilities and advantages of the platform? Then please log in – or register here.

An error has occurred.

Trilo VCU120

The TRILO VCU120 verticutting unit is mounted on a robust steel frame which can be linked to a category I three point hitch. The VCU120 has a working width of 1,20 meter and can be used behind a tractor from 15 HP (11 kW). This verticutting unit is mounted off set, so you will not drive over your freshly verticut soil. A PTO shaft with shear bolt powers the chain driven axles. The verticutting depth can be easily adjusted through a threaded spindle on both sides of the unit. The VCU120 can optionally be equipped with floating wheels at the back and a flexible 3 point linkage for even better contour following. The VCU120 can easily handle a thatch layer of up to 5 cm deep.

Trilo VCU150

The TRILO VCU150 verticutting unit is mounted on a robust steel frame which can be linked to a category I or II three point hitch. The VCU150 has a working width of 1,50 meter and can be used behind a tractor from 20 HP (14 kW). A Walterscheid PTO shaft with shear bolt powers the chain driven axles. The verticutting depth can be easily adjusted through a threaded spindle on both sides of the unit. The VCU150 can optionally be equipped with floating wheels at the back and a flexible 3 point linkage for even better contour following. The VCU150 can easily handle a thatch layer of up to 4 cm deep.

Trilo VCU200

The TRILO VCU200 verticutting unit is mounted on a robust steel frame which can be linked to a category I or II three point hitch. The VCU200 has a working width of 2,00 meter and can be used behind a tractor from 20 HP (14 kW). A Walterscheid PTO shaft with shear bolt powers the chain driven axles. The verticutting depth can be easily adjusted through a threaded spindle on both sides of the unit. The VCU200 can optionally be equipped with floating wheels at the back and a flexible 3 point linkage for even better contour following. The VCU200 can easily handle a thatch layer of up to 4 cm deep.

Trilo VCU240

The TRILO VCU240 verticutting unit is mounted on a robust steel frame which can be linked to a category I or II three point hitch. The VCU240 has a working width of 2,40 meter and can be used behind a tractor from 25 HP (18 kW). This verticutting unit is mounted off set, so you will not drive over your freshly verticut soil. A Walterscheid PTO shaft with shear bolt powers the chain driven axles. The verticutting depth can be easily adjusted through a threaded spindle on both sides of the unit. The VCU240 can optionally be equipped with floating wheels at the back and a flexible 3 point linkage for even better contour following. The VCU240 can easily handle a thatch layer of up to 4 cm deep.

Trilo VCMK3

The VCMK3 verticutting unit is a mechanically driven, flexible verticutter with 3 independent terrain following elements. The verticutting knives turn with the driving direction for a tight verticut and as little root damage as possible. The VCMK3 is available in working widths of 1,70 and 2,00 meter and can be mounted under the SG400. This flexible verticutting unit is suitable for tractors from 25 HP (18 kW) and is driven by a Walterscheid PTO shaft with shear bolt. This unit is equipped with gauge wheels and sliders that are placed in the heart of the axle so that the elements follow the contours of the soil perfectly. The axle can be equipped with 2 mm Tungsten tip knives as well as 3 mm Manganese steel tip knives. The verticutting depth can be adjusted easily through a threaded spindle on both sides of the unit.

Trilo C15

The TRILO C15 is a unique machine that can flail mow, verticut and collect in one pass. This robust machine is suitable for tractors from 30 HP (22 kW) and can be used on all sorts of surfaces. From sports fields to rough terrain, such as verges. The over 1 m3 large hopper can be hydraulically emptied and the shape of the dust cap guides the airflow to the back instead of upwards. The knives are easily accessible for cleaning, maintenance or changing. Braces on the sides of the machine protect the axle from damage as a result of collisions. Besides mowing and collecting grass, the powerful wind paddles can also be used to collect leaves or horse droppings.

Trilo S3 vacuum sweeper

LOGO_Trilo S3 Laubsaugwagen

Trilo S4 vacuum sweeper

LOGO_Trilo S4 Laubsaugwagen

Trilo suction units

LOGO_Trilo Ladegebläse

Trilo leaf blowers

LOGO_Trilo Laubbläser

There are no entries in your notes.

Show notes



top

The selected entry has been placed in your notes!

If you register you can save your notes permanently and access all entries even when underway – via laptop or tablet.

You can register an account here to save your settings in the Exhibitors and Products Database and as well as in the Supporting Programme.The registration is not for the TicketShop and ExhibitorShop.

Register now

Your advantages at a glance:

  • Advantage Save your notes permanently. Use the instant access to exhibitors or products saved – mobile too, anytime and anywhere – incl. memo function.
  • Advantage The optional newsletter gives you regular up-to-date information about new exhibitors and products – matched to your interests.
  • Advantage Call up your notes mobile too! Simply log in and access them at anytime.