FSI power-tech ApS Maschinenfabrik

Machine available in diesel or petrol, for both versions the following special characteristics: Working width all 135 cm wide, height 80 cm and depth 38 cm. Swivel operation bar offering the operator to walk nicely behind his machine during driving, and when stump cutting he is positioned forward on the side of the machine. Here he has a better sight, and is not staying close to the engine. Twin wheels comes easy off, by just one centre bolt, and so the machine goes through a 80 cm narrow gate. Stump cutting times available in the leaflet page 3. (Photo taken in Czech Republic).

This machine has a very large working width 200 cm. It is remote controlled and all joy-stick functions are proportional controlled. Stump cutting is often a lot of logistic mowing from job to job. So remote button functions low or fast speed (2,8 km/h) and 4wd with diff. lock button. This machine also has a tilt-function lifting the back of the machine, now the cutter wheel comes deeper +20 cm and so down to 60 cm. Stump cutting times available in the leaflet page 3. Require additional information booklet describing all features.

(Photo taken in Belgium).

Ergonomic the best on the market. Low weight enables easy handling of the machine, whether mowing from stump to stump or actual stump cutting. The easy stump cutting operation is possible thanks a greased hub, shaft and bushing. So the swing operation is exercised very easy and without any force at all. The machine is with 2 individual brakes operated at the handgrip. This makes it possible to make 1 wheel brake shift wise and so twist the other wheel over an obstruction. Stump cutting times available in the leaflet page 3.

(Photo taken in Denmark).

For excavator attachment we offer 6 models from 1,5 ton to 20 ton. Many years of experience in attaching the right machine to the right excavator performance (L/min.). In addition we also offer several other hydraulic stump cutters fitting mini loaders, skid steers, track mowers etc. For all models the teeth’s are turned 3 times for more wear. Stump cutting times available in the leaflet page 3.

(Photo taken in Finland).

Machine with 4 electric/hydraulic functions controlled by just one joy-stick, from the tractor cabin or on the side of the machine. The swing and the height joy-stick operation are proportional, so the operator decides the speed of the movement by joy-stick position. We offer 3 different model sizes for tractors from 25-120 HP all with joy-stick controls. Stump cutting times available in the leaflet page 3. (Photo taken in Norway).