CAEB INTERNATIONAL SRL

Thanks to its specially designed drawbar, MOUNTAINPRESS 550 TPL is towed laterally by the tractor with the advantage, especially for small tractors with low centre of gravity, not to pass on the hay windrow with the tractor wheels.

Its compact design makes it possible to collect and bale the mowed product on any type of ground, also in hilly and mountain areas and on steep slopes.

MOUNTAINPRESS 550 TPL is a highly efficient machine, as it produces easy-to-handle bales with a productivity of approximately 1,500 kg hay per hour.

Main features

• all the baler controls are actuated from the driver’s seat
• an acoustic signal warns the operator when the bale is ready for wrapping
• the wrapping cycle is operated through the baler electric control board
• the pressing chamber opens and closes via the hydraulic control located on the tractor
• power transmission via cardan shaft

Technical data

• Length 1,950 – 2,250 mm
• Width 1,225 – 1,750 mm
• Height 930 – 1,030 mm
• Weight 330 kg
• Bale output per hour 50 - 80
• Pick-up 700 mm
• PTO 540 rpm
• Tyres 18.5x8.50/8” PR 6
• Minimum power required 15 kW
• Italian road homologation Yes

MOUNTAINPRESS 550 TML is a side-towed mini round baler with a reduced weight and a low centre of gravity that can be coupled to any kind of power unit, even without PTO. It is equipped with a 10.0 kW (13.5 HP) electric starter engine that allows to collect, bale, wrap and unload the bales without any thermic or hydraulic request to the power unit.

MOUNTAINPRESS 550 TML can work with any kind of power units without PTO like atv, quads, small excavators, tracked vehicles, golf cars etc. Its specially designed drawbar offers the advantage not to pass on the hay windrow with the power unit wheels.

MOUNTAINPRESS 550 TML is a highly efficient machine, as it produces easy-to-handle bales with a productivity of approximately 1,500 kg hay per hour.

Main features 

• all the baler controls are actuated from the driver’s seat 
• an acoustic signal warns the operator when the bale is ready for wrapping
• wrapping cycle
• electric ignition, wrapping cycle, pressing chamber opening and closing are operated via an electrical control board

Technical data

• Length 1,950 – 2,250 mm
• Width 1,450 – 1,700 mm
• Height 1,150 mm
• Weight 430 kg
• Bale output per hour 50 - 80
• Pick-up 700 mm
• Tyres 18.5x8.50/8” PR 6
• Engine power 10 kW

MOUNTAINPRESS 550 TPC-S is a mini round baler carried by means of the tractor three point linkage. Its small size and light weight make it ideal for working with small four-wheel tractors with low centre of gravity on any type of ground, also on hills, in mountain areas and on steep slopes.

MOUNTAINPRESS 550 TPC-S is a highly efficient machine, as it produces easy-to-handle bales with a productivity of approximately 1,500 kg hay per hour.

Main features 

• all the baler controls are actuated from the driver’s seat 
• an acoustic signal warns the operator when the bale is ready for wrapping 
• the pressing chamber opens and closes via the hydraulic control located on the tractor
• towing kit available as an optional to tow the machine centrally behind the tractor 
• power transmission via cardan shaft

Technical data

• Length 1,250 mm
• Width 1,225 – 1,750 mm
• Height 930 – 1,030 mm
• Weight 330 kg
• Bale output per hour 50 - 80
• Pick-up 700 mm PTO 540 rpm
• Tyres 18.5x8.50/8” PR 6
• Minimum power required 15 kW

The MOUNTAINSILOS mini wrapping machines were designed to further improve the work and lifestyle of farmers and breeders, allowing them to wrap the bales produced with the mini round balers MOUNTAINPRESS and make silage out of them.

MOUNTAINSILOS is available in three different models: for four-wheel tractors, for mowers and walk-behind tractors and even with electrical ignition for stationary work.

Main features

• full-automatic bale wrapping 
• adjustable wrapping revolutions 
• automatic stop when the bale is fully wrapped 
• power transmission via cardan shaft 
• quick coupling flange or electric motor depending on the model

Technical data

• Weight 89 - 93 kg depending on the model
• Film stretching 50%
• Plastic film height 25 cm
• Plastic film length 1,800 m
• Lap winding 6 / 4 / 2

MOUNTAINPRESS 550 is a mini round baler that can be coupled to mowers and walk-behind tractors of all makes and models by means of a quick coupling flange.

MOUNTAINPRESS 550 is fastened to the frontal part of the power unit, so that its weight acts on the rear driving wheels for a better adherence to the ground also when the baler works uphill. Its compact design makes it possible to collect and bale the mowed product on any type of ground, also in hilly and mountain areas and on steep slopes.

MOUNTAINPRESS 550 is a highly efficient machine, as it produces easy-to-handle bales with a productivity of approximately 1,500 kg hay per hour.

Main features

• adjustable pick-up height 
• steering bar with parking brake
• lever to start bale wrapping
• bale counter 
• bale pressure adjuster 
• power transmission via quick coupling flange

Technical data

• Length 1,350 mm
• Width 1,070 mm
• Height 990 mm
• Weight 256 kg
• Bale output per hour 50 - 80
• Pick-up 700 mm
• Tyres 3.50.8 PR 4
• Minimum power required 6.6 – 14.8 kW