Nedo GmbH & Co. KG

Nedo PRIMUS 2 is the fully automatic rotating lasers for demanding professionals. Maximum precision, sturdiness and dependability for tough construction sites, plus intuitive control with a digital display to indicate the operating states, are distinctive features of all models in the PRIMUS² Series.

The PRIMUS 2 HVA2N model is the first fully automatic dual slope laser with AutoAlign function. This innovative function enables the laser plane to be aligned on a target at the push of a button. Ideal for gardening and landscaping, for modelling terrain and for alignment, for example for formwork or building walls for gardens.

Applications:

• Depth control for excavations
• Concrete casting
• Setting foundations and footings
• Concrete casting
• Use of batter boards
• Bricklaying
• Landscaping
• Laying screed
• Facade construction
• Setting reference markers
• Rough and fine grading
• Ceiling construction

Features:

• Direct grade entry for the x and y axis
• Tilt control: the position of the laser is continuously monitored in the tilt mode
• AutoAlign function: automatic alignment of the laser beam to the zero mark of the laser receiver
• Robust motor-powered levelling
• Large, clear display showing inclination, rotation speed, battery level, etc.
• Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors are avoided
• High-power laser diode, laser class 3R, for highly visible laser beam and easy work at the
  close range
• Alternatively available with laser class 2 with Bright Beam Technology^TM
• Scan function and dot mode
• Upward plumb beam
• Rotor protection made of break-proof glass
• Highly accurate even under toughest conditions

Scope of delivery: Incl. multi-function module COMMANDER 2 HVA2N (laser receiver incl. radio remote control), Heavy-Duty rod clamp, magnetic target board, rechargeable batteries, charger, quick-Fix rapid locking system, transport case

https://nedo.com/en/product/laser-und-zubehoer/nedo-primus-2-hva2n/

The fully automatic horizontal rotating laser with Easy Control – the one-pushbutton operation for extremely easy handling.
The rotating laser offers fully automatic self-levelling. The automatic level control stops the laser if it receives a heavy jolt. In this way height errors are avoided. Simply switch it on and off you go! Thanks to the further-developed seal, the new SIRIUS 1 is splashproof and dustproof in accordance with IP 65 and therefore meets sealing requirements expected of only much more expensive rotating lasers. The new rotor protection in aluminium and shatterproof glass means the new SIRIUS 1 is even more robust, so it can cope easily with knocks and falls. Thanks to the newly designed rubber handle, the new SIRIUS 1 is easy to operate and handle. The rubber-covered feet ensure improved stability even on smooth surfaces.

The rotation laser SIRIUS 1 H is available with the new digital laser receiver ACCEPTOR MAXX.

The Nedo ACCEPTOR MAXX is a new digital laser receiver with a millimetre display and an extra-large detector field. The robust housing and virtually indestructible Nedo heavy-duty holding bracket make the new ACCEPTOR MAXX perfect for use under harsh conditions.

Large illuminated digital LC displays on the front and back show the deviation of the zero line of the ACCEPTOR MAXX from the plane of the rotation laser. The easy-to read displays allow you to read off height differences directly in mm, without calculation. In addition, LEDs show the position of the laser receiver in relation to the laser plane. The ingeniously designed display can be seen from both the front and the side. The LEDs are extremely bright, allowing them to be read from a great distance. An acoustic signal can be set to indicate the position of the laser receiver.

Scope of delivery: Heavy-duty holding bracket and batteries supplied as standard

ACCEPTOR MAXX is also available as single product

Applications SIRIUS 1 H:

• Casting concrete floors
• Fine grading
• Metre marking in interior work
• Bricklaying
• Excavation work
• Landscaping

Features SIRIUS 1 H:

• Self-levelling range ± 5° motor-powered, with automatic level control
• High-power laser diode (3R) for very good laser beam visibility
• Alternatively available with laser class 2
• Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors
  are avoided
• Rugged housing protected against low pressure jet water in accordance with IP 65
• Rotor protection made of cast aluminium and break-proof glass
• High-power NiMH rechargeable batteries for long operation

 Scope of delivery SIRIUS 1 H: incl. laser receiver ACCEPTOR MAXX, rod clamp, rechargeable batteries, charger and transport case

https://nedo.com/en/product/laser-und-zubehoer/nedo-sirius-1-h/

Nedo LINUS 1 HV is a new, extremely robust, fully automatic universal laser for levelling, aligning and
marking off right angles for outdoor applications and interior finishing. The new, fully automatic universal laser Nedo LINUS 1 HV combines a horizontal 360° laser line with four individually
switchable vertical laser lines arranged at 90° angles to one another. The vertical laser diodes are configured so that the laser lines start right at the foot of the unit. An additional plumb beam marks the intersection of the four vertical lines on the floor.
The new Nedo LINUS 1 HV is therefore perfect not only for levelling and aligning, but also for quick and easy marking off right angles in outdoor applications. It is ideal for placing formwork, building carports, terraces and garages, and laying slabs and paving stones.

 Applications:

• Paving
• Borders
• Car parks
• Terraces and sun decks
• Marking off right angles in terrain
• Foundations
• Formwork and walls
• Timber post structures
• Sole plates
• Carports and 1:1 elevations

Features:

• Extremely robust
• Horizontal 360° laser line
• Four vertical, individually switchable laser lines at 90° angles, pointing down
• Plumb point
• Robust, motor-powered levelling, Self-levelling range ± 5°
• Rugged housing protected against low pressure jet water in accordance with IP 65
• Connecting thread 5/8“
• Multifunctional base made of diecast aluminium with fine adjustment for precise axis alignment

Scope of delivery: Incl. laser receiver ACCEPTOR Line with mm display, Heavy-Duty rod clamp, multifunctional base with fine adjustment for precise axis alignment, rechargeable batteries, charger, laser glasses, target board and transport case

https://nedo.com/en/product/laser-und-zubehoer/nedo-linus-1-hv/

The pipe laser TUBUS 2 is the reliable product for grueling use in heavy construction. The rugged aluminium housing has an IP 68 protection rating. The shock-protection system of the TUBUS 2 protects sensors and electronic components even under the toughest conditions. The Nedo TUBUS 2 makes no compromises – Made in Germany. Green laser beams are four times as visible to the human eye as red beams with the same power. For this reason, the Nedo TUBUS 2 Pipe Laser is fitted as standard with a green laser diode that is optionally available with laser class 2 or 3R. The green laser dot of the TUBUS 2 is easy to see on the height-adjustable target board, even in unfavourable light conditions. This high visibility means that jobs can be completed much faster.

Features:

• Green laser diode for top visibility, optionally available with laser class 2 or 3R
• SmartControl for simple, intuitive operation
• Extremely robust design, IP 68 submersion protection
• Compact dimensions for use in tight pipe bends and pipes with diameters of 125 mm and more
• Laser and remote control with OLED display for easy read-offs
• Combined radio and infrared remote control for top transmission performance
• Manual alignment function
• Inclination measurement function
• Cross slope compensation, also for plumbing
• Adjustable vibration sensitivity
• Pipe slider for simple insertion of the laser into small-diameter pipes
• Plumb LED upwards
• 5/8" tripod thread
• Li-Ion battery for long periods of use
• Battery charger for simultaneous charging of the laser and the remote control
• Sets of feet for 150 mm, 200 mm, 250 mm and 300 mm pipe diameters
• Height-adjustable target board

Scope of delivery: Incl. radio remote control, height-adjustable target board, sets for feet for 150 mm, 200 mm, 250 mm and 300 mm pipe diameters, battery charger, transport case

https://nedo.com/en/product/laser-und-zubehoer/nedo-tubus-2/

Sturdy laser receiver with easy-to-view display for use with construction machinery. When used with a rotating laser, the new Nedo ACCEPTOR M excavator receiver accurately shows whether the excavator blade is above, at or below the required height. Large, bright LEDs make it easy to view the display from the excavator cab. The switchable tilt compensation accounts for tilting of the dipper arm up to an angle of 30°. In this way the ACCEPTOR M reliably and accurately shows the position of the excavator blade in relation to the required height.

Features:

• Robust excavator receiver for all rotating lasers with red laser beam
• Large detector field with a length of 190 mm
• 220° reception angle for reliable reception of the laser beam
• Very sturdy design
• Splashproof and dustproof in accordance with IP 66
• Firmly attached to the dipper arm by means of 12 very strong magnets
• Rubber studs to prevent slipping
• 3 precision levels with resolutions of 4 mm, 8 mm or 12 mm
• Very bright LEDs for easy viewing from the cab
• Tilt compensation up to 30° for greater precision even when the dipper arm is inclined
• Deactivatable signal tone
• Transport case and folding rule included
• Suitable for all rotating lasers with wavelengths from 600 nm to 780 nm

Scope of delivery: Incl. transport case and folding rule

https://nedo.com/en/product/laser-und-zubehoer/nedo-acceptor-m/