TERRA LEVEL

TL1
TERRA LEVEL 1 CM

3 mm joint
diameter 120 mm
joint base height 14 mm
stackable from 1 cm to
more than 20 cm

TERRA LEVEL® pedestals can be used for all build-up heights and adjustments of incline. Build-up is reached through stacking the pedestals. The products fit into each other with a 90° turn - therefore an optimal stability can be achieved. A huge advantage is the products flexibility of use. E.g. for layings arranged in an offset pattern you can just remove one joint or cut the pedestals into half.

EVEL BLOCK 3 CM

3 mm joint
diameter 120 mm
joint base height 10 mm
stackable

TERRA LEVEL® - block 3 cm was constructed to save time and costs. The block can be used from a minimum raising height of 5 cm and has to be completed (bottom and top) by TERRA LEVEL® 1 cm to guarantee anti-slipping conditions.

TL3 TERRA LEVEL
ADJUSTMENT-DISC 1MM

stackable from 1 mm to
more than 10 mm

TERRA LEVEL® adjustment-disc 1 mm allows easy levelling. Different thickness of slabs, differences of surface as well as fall of the terrace can be adjusted from 1 mm to 10 mm on every corner of the slab. Adjustment-disc can be fixed in an improved way. In case of removing a joint (e.g. for arrangements in an offset pattern) locking the adjustment-disc within two pedestals is also possible.

TL4
TERRA LEVEL BLOCK
6 CM TO 13 CM

TL4 tile supports 6 cm to 13 cm is adjusted by means of an adjustment ring and two opposing threads. If necessary, fine adjustment and slope compensation is completed using the TL3 adjustment shims 1 mm. For raising heights just over 13 cm, TL1 tile supports 1 cm, TL2 blocks 3 cm and TL3 adjustment shims 1 mm can all be used for the construction. By stacking two or more TL4 on top of one another, all raising heights from 6 cm to 52 cm can be achieved.

TL5
TERRA LEVEL BLOCK
FROM 14 CM TO 103 CM

TL5 tile supports from 14 cm up to 103 cm offer the same features as TL4 but can only be used in conjunction with TL6 coupling tubes. TL6 is cut to the required length and inserted into the guides at the top and bottom. The support disc can be adjusted by a further 4 cm by screwing. TL5 was designed to speed up working processes and save costs.