ANRIN GmbH

• Grating and edge rail made of ductile cast iron, intermeshed
• RapidLock-fastening, self-locking, quick and secure
• Load classes D 400* – F 900
• Simple installation and assembly
• Extensive system accessories for the demand of all projects
• For laying with sloping, stepped and constant invert
• High flexibility in laying Capability by UNILINK® joint system

• UNILINK® joint system, independent of laying direction, for watertight sealing
• Non-stress integrated steel edge rail with 6 mm edge width, optionally galvanised or stainless steel
• TwistLock fastening, quick and secure
• Load classes A 15 bis E 600
• Simple installation and assembly
• Extensive range of gratings
• For laying with sloping, stepped and constant invert

• Exact match to the surface due to OMEGA-Profile
• Rational laying due to UNILINK® joint system
• Variable surface design
• Rigid
• Long-lived
• Resistant to chemicals
• Generally approved by building authorities

Optimised:

• Slotted top with OMEGA profile
• Joint system: UNILINK®
• Anchor strips for attachement for the surface

The solid channel system with cast-iron edge rails for the toughest requirements

In civil and road engineering with the KF-100 the planner has a new drainage system at his proposal, which supplies all forms of load classes from normal passenger car traffic up to high frequently heavy duty traffic. It covers all attributes of universal channel drainage with nominal width 100mm and it offers highest stability because of a 8 mm thick cast iron rail and some vertically reinforced side flanks, especially when installing in asphalted surfaces. The Improved hydraulic capacity of the KF-100 channel system guarantees a maximum drain, even in case of extreme rain.

The ANRIN KF-100 channel system can be supplied with all gratings of the ANRIN KE series and offers supplemental grating types for the load classes E600 and F900. Thereby the trading gets an all-purpose drainage system with respectively low storage costs.

The ANRIN KF-100 channels are available with constant invert and slope invert with heights between 10 and 25 cm. The channels of 100 and 50 cm length are completed by accessories as sump units, end caps and step connectors for bypassing the invert level.

The ANRIN KF-100 channels are available with constant invert and slope invert with heights between 10 and 25 cm. The channels of 100 and 50 cm length are completed by accessories as sump units, end caps and step connectors for bypassing the invert level.

• sports arenas with equal height surfaces
• sports facilities with coating combination turf/synthetic coating and turf/brick red
• sand and granulate ate filled turfs

ANRIN Sport Tray Channels of resin concrete represent an appropriate alternative to drainage of sporting fields loose coatings (as brick-red, sand or granulate filled turfs). Easily laid and cleaned as an uncovered channel, this is a safe and clean solution as a play area edging due to the favourable height/width ratio. Each channel is equipped with 2 steel anchors, which guarantee a rugged attachment to the substrate. Installation is conducted into a foundation of 15 x 35 cm with expansion joints every 20 m.