dot-spot GmbH & Co.KG

Compact multifunctionality – the LED light bollard twist combines two luminaires in its solid stainless steel housing, which can be rotated and swivelled independently of each other. In this way, it overcomes longer distances from the side of the road and replaces two bollard luminaires of conventional design with one luminaire. Or it illuminates the path with one spotlight and the adjacent planting with the other.
twist has a power consumption of 2 x 3 watts at a voltage of 12-24V DC. Depending on the colour temperature, the luminaire offers a luminous flux of up to 2 x 243 lumens. The beam angle is focused on 6°. As a special version, the bollard lamp is also available with a spread lens for a wider light distribution. twist is 600 mm high and has a diameter of 120 mm.

dot-spot will be presenting two other bollard luminaires, cone and tulip, at the GaLaBau fair 2022.

Brilliantly homogenously luminous, extremely robust and individually made to measure: The new LED lighting line slimlux 20 SC shows all-round strength for use in demanding outdoor areas.

The light line is designed to be embedded in concrete or natural stone. With its reduced dimensions of only 20 x 20 millimeters, slimlux 20 SC can be easily installed in the groove of concrete or natural stone blocks as well as in less strong slab material. It directly or indirectly illuminates staircases, staircases, seating blocks, street furniture and much more. The brilliantly homogeneous illumination guarantees a uniform illumination of the surface to be illuminated with indirect illumination. Even when wet or shiny material does not reflect light points. Directly luminous, slimlux 20 SC acts as a decorative and functional lighting element at the same time.
The high protection class of IP67 makes the line safe for outdoor use. And not only for the private garden. Due to the high impact resistance of the IK10, the light line withstands possible vandalism and is therefore predestined for use in public spaces.

In terms of lighting technology, slimlux 20 SC offers maximum efficiency and quality: With a power output of 10 watts per meter, the light output is 1,000 lumens. The line is dimmable via all control types. The high colour rendering of CRI>90 in the offered colour temperatures of 2700K, 3000K and 4000K meets the highest demands for good light.

The ring light spring-led effectively illuminates the water outlet of spring stones and water features. As a light source for direct installation in the stone or water feature, spring-led itself steps into the background. It is their lighting effect that inspires. In particular, the transparent casting makes the water course shine brightly.

The lamp is made of solid V4A stainless steel and has an outside diameter of 50 millimeters. Inside it leaves room for a 1 inch thick hose. spring-led is simply attached to the hose, so that the water flow can leak out completely in the diameter of the hose and does not build up. The highly efficient LEDs are completely embedded in a UV-resistant seal. Thanks to the solid housing, the heat is optimally dissipated, so spring-led has a service life of around 50,000 hours. The source stone lamp is connected to a 24 volt control unit or to a dot-spot multibox from the accessories range using a five-metre cable, optionally with open end or M12 connector. spring-led is dry running safe, a THERMOPROTECT system prevents overheating in case of operation without water.

spring-led is available in colour temperatures 3,300 Kelvin with a luminous flux of 525 lumens and 6,200 Kelvin with 599 lumens at a power of 6 watts each. For the perfect play of colours, we also offer the lamp in the RGB version. spring-led is dimmable and has protection class IP68.

It is predestined for fascinating lighting effects in pools and ponds: the aquaros 20 LED spotlight. The reduced housing size allows the spotlight to retreat as a light source and the light to look impressive. The diameter of the aperture is only 124 mm, that of the illuminated surface 60 mm. The housing of the pool and pond spot is made of V4A stainless steel 316L, in addition the surface is electropolished for optimal protection against chlorine. The 8 mm glass of the illuminated surface ensures high safety and shock resistance (IK08), and the aperture is so small that the spotlight is almost flush to the wall of the pool.
aquaros 20 is highly efficient: With an output of 20 watts, up to 2,150 lumens are generated depending on the colour temperature. If pool or pond are to be staged in different colours, the RGB+White spotlight is available.
Safety and durability on the whole line: The innovative THERMOPROTECT system ensures that the LED does not overheat in the event of high ambient temperatures. The dimmability of the spotlight via almost all control systems is a matter of course.

Welcome to the dot-spot product family: From now on we also offer our small clarios-mini LED spotlight in the housing colour black. Positioned in the open space, it is optically discreet, visibly positioned forward, and stands for simple elegance in the context of modern architecture.
Our “little one”, which is also made of V4A stainless steel, is a very compact LED spotlight that generates a high light output of up to 300 lumens with a 3 watt power LED. This is why it is so versatile: Plants and shrubs as well as grasses are illuminated discreetly but effectively. Individual objects, such as statues or architectural elements, are spotlighted precisely by the spotlight. The light output can be varied from 0 to 100% with a PWM dimmer via a separate dimming input. Also with the clarios-mini, the THERMOPROTECT system prevents overheating of the LED and ensures a long service life of the luminaire.